Roof and Gutter Maintenance: The Seasonal Checklist That Prevents Leaks
Published
Most roof leaks do not start on the roof. They start at the edges — the flashing where the roof meets a wall, the step flashing around a chimney, or the valley where two planes meet. Water finds the path of least resistance, and a good roof system is mostly about directing water away from the joints.
Here is a checklist you can work through in an afternoon, twice a year.
- Look from the ground first. Binoculars and a driveway are enough to spot missing shingles, sagging sections, and darker staining around penetrations.
- Inspect the flashing. Flashing around chimneys, skylights, vents and the wall-to-roof transition should be tight against the masonry and free of lifted edges, exposed fasteners or visible sealant cracking.
- Check the valleys. If you have valleys, look for a dark line of wear where water concentrates, and for granules washed out of the gutter below.
- Clear the gutters. Leaves are the most common cause of blocked gutters, and a blocked gutter overflows behind the fascia and into the foundation. Check that downspouts discharge away from the foundation and that extensions are connected.
- Look at the fascia and soffit. Water staining here means the gutter has been overflowing for a while. Rot in the fascia is a bigger repair than a cleaning.
- Check the sealant and penetrations. Around vents and exhaust boots, the sealant should be intact and pliable. Cracked sealant is a leak waiting for rain.
- Go in the attic. On a dry day, look for daylight through the roof deck, water staining on the rafters, or dark streaks of moisture. Also check that the bathroom and kitchen exhaust fans terminate outside the building and not into the attic.
Two things that cause a lot of unnecessary replacement work: power washing shingles, which strips the protective granules and can force a premature re-roof, and installing a new layer of shingles over an old one, which adds weight the structure was not designed for and hides the condition of the deck. Get the roof to the bare deck before reroofing if the deck is in poor shape.
Roofing work carries real fall risk. If you are going up on the roof, use proper equipment. Most inspection tasks are visible from a ladder at a safe angle, and a roofer can check what you cannot reach safely.
If the chimney shows damage as well as the roof, use the chimney inspection checklist to organize the questions for your inspection.
- roofing
- gutters
- maintenance