7 Signs Your Brick Masonry Needs Repair Before the Crack Spreads
Published
Brick and mortar are two different materials with two different jobs. Brick is strong in compression and terrible in tension. Mortar is weak on purpose, so it can absorb movement and let the wall flex. That design is why cracks show up in the mortar joint first and why the repair that matters is often the least dramatic-looking one.
The following are the signs worth acting on.
- Spalling brick. The face of the brick is flaking, popping, or coming off in layers. Spalling means water got in, froze, and pushed the brick apart from the inside. Once a brick has spalled, it is structurally weaker and needs replacing — patching the surface does not help.
- Mortar that crumbles under a fingernail. Sound mortar resists a fingernail and a wire brush. If you can rake it out with a key, the joint has lost its strength.
- Wide or stepped cracks. A crack wider than about a quarter inch, or one that steps through several courses of brick, indicates movement rather than settling. Stepped cracks in a chimney often mean the chimney is no longer plumb.
- A leaning chimney. Stand at a distance and look at the roofline where the chimney meets the roof. A chimney that is not plumb, or that has separated from the house, needs attention quickly.
- Efflorescence. White, powdery salt deposits on the brick surface mean water is moving through the wall and evaporating. Efflorescence is never the problem; it is the report.
- Spalled or missing mortar at the crown. This is the single most common masonry defect on chimneys, and it is the one that causes the most damage over time.
- Open joints in a parapet or retaining wall. Water behind the wall is what freezes and pushes the wall outward.
The repair method depends on what you found. Tuckpointing — cutting out failed mortar and replacing it — is appropriate for sound brick with bad joints. Repointing is a different term and means the same general family of work. If the brick itself is spalled, individual bricks need to be cut out and replaced with matching material. Full restoration of a large area is a bigger job, and matching new brick to eighty-year-old brick takes experience.
What to avoid is covering a crack with sealant and calling it done. Masonry sealants are useful for very small, stable cracks as a temporary measure, but they cannot rebuild a joint, cannot replace spalled brick, and cannot stop water that has already gotten into the wall.
Before hiring anyone, ask what portion of the wall they are replacing and whether the price includes matching material. Then have the crown checked as part of the same visit. Most masonry work is wasted if the crown above it is still letting water in.
- masonry
- brick
- repair